Tyre Markings Explained: A Complete Guide
There are countless numbers and letters on the side of a tyre. They contain important information about the tyre's size, load capacity and other properties.
Understanding the Size Marking
Let's take a typical marking as an example: 205/55 R16 91V
The structure of a tyre marking: width / aspect ratio construction rim diameter load index speed rating. For example, 205/55 R16 91V means: 205 mm wide, 55% aspect ratio, radial, 16-inch, 615 kg per wheel, max 240 km/h.
205 - The Tyre Width
The number shows the tyre's width in millimetres. In this case the tyre is 205 mm wide.
55 - The Height-to-Width Ratio
This number shows what percentage of its width the tyre's height is. Here the height is 55% of the width.
R - The Tyre Type
The "R" stands for a radial-construction tyre. This is the most common type today.
16 - The Rim Diameter
The number shows the rim diameter in inches. This tyre is for a 16-inch rim.
91 - Load Index
This number shows how much load the tyre can carry. A load index of 91 corresponds to 615 kg per wheel.
V - Speed Rating
The letter shows the maximum permitted speed of the tyre. "V" means 240 km/h.
Other Important Markings
- M+S - Mud and Snow, winter or all-season tyre
- DOT - Date of manufacture (e.g. DOT 2023 = week 20 of 2023)
- TWI - Location of the tread wear indicator
- XL - Extra load tyre
Why Is It Important to Know This?
Choosing a tyre of the right size and specification is key to safety and performance. Always check the approved sizes listed in the car's registration document before you buy!




